manualshive.com logo in svg

Canon OCT-A1, Operation Manual

Share
Download
Canon OCT-A1 Operation Manual Download Page 242

242

8 Settings

License Management

You can manage the license in [Product License] and the licenses in [Option License] 
(optional product).
License keys should be issued and registered. For details, consult your sales 
representative or local Canon dealer.

License Activation

This section describes how to activate the license key (option license).

1 

Select the desired application and click [Activate Option].

The [Option License Activation] screen appears.

2 

Enter the license key.

3 

Click [OK].

The license is activated.
The status changes from [Not Activated] to [Activated].

4 

Click [Close].

The [License Management] screen closes.

Information

Trial periods for optional licenses

Select an application you want to try out, and then click [Start Trial] to start trial use.
The trial period for the optional licenses is for 90 days from the day you start the trial.
When there is an application whose remaining trial period is less than 30 days, the 
information for that trial period appears when you log in.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb   242

10/26/2020   10:50:10 AM

Summary of Contents for OCT-A1





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands