Canon OCT-A1 Operation Manual Download Page 207

Page: 207 / 276

8 Settings

207

GUI Settings

This section uses screens from RX Capture for OCT as examples in explanations.
On the [GUI Settings] screen, set the screen display.

• [Birth Date/Age for Capture Screen]

Choose between [Birth Date] and [Age] for the patient information on the capture
screen.
This setting can be set in RX Capture for OCT.

• [User/Patient Name format]

Select the display order of the patient name.

• [Application Colors]

Select the background color of the software.

Information

Restart the software whenever you change the [Application Colors] setting.

• [Default view mode for RC report]

Select the default view mode for the retinal image report.

• [Progression for OCTA Examination]

Select it to display the examination done in [OCTA] mode on the [Progression] tab
screen.

BT8-1794-E01_RX OCT-A1_HS100 V4.6_CVS.indb 207

10/26/2020 10:50:05 AM

Summary of Contents for OCT-A1





















































































































































































































































































Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands

Canon OCT-A1, Operation Manual

Search results

Summary of Contents for OCT-A1

Reviews:

Brands by name

Popular brands