Canon Oce PlotWave 450 Operation Manual Download Page 229

Page: 229 / 330

Update the system software in Océ Express WebTools

Introduction

You can update the system via Océ Express WebTools. You can find the settings under the
[Support] - [Update] tab.

The [Update] tab has the following functionalities:
•

update

the system software

•

install

system patches (security)

• check the current software version
• check the execution status of the latest patch applied ('Success' or 'Failure').

Before you begin

For an update of the system software, get the packages for the system software update from your
local representative.

NOTE

• When the system update package is larger than 2 GB and you use Internet Explorer, you must

use Internet Explorer version 9 or higher.

• Do not restart the printer during the upload and update process.

Procedure

Select the [Support] - [Update] tab.

Click on the [Update] button for an update of the current system software.

Browse to the packages you need ([Open source package (*_os.sup)] or [Software package
(*_sw.sup)]).
Select the files you need and click 'Open'.

Click [Ok] to confirm, or [Cancel] to reject your entries.

You are now ready to update the software. A warning message appears.
Click [Ok] to confirm, or [Cancel] to reject your entries.

The update starts. At the end of the process, the controller restarts.
Click [Ok] to open Océ Express WebTools.

You are informed whether the update was successful.

Update the system software in Océ Express WebTools

Chapter 6 - Maintain the Printing System

229

Summary of Contents for Oce PlotWave 450











































































































































































































































































































































Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands

Canon Oce PlotWave 450, Operation Manual

Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands