Canon Oce PlotWave 450 Operation Manual Download Page 264

Page: 264 / 330

Empty the waste box of the reinforcement unit

Introduction

The protective sheet from the reinforcement tape is stored in a waste box. For each roll of tape,
you must empty the box twice.

NOTE

You can empty the waste box while the printer is running.

Procedure

Open the waste box.
• First pull the waste box to the left-hand side.
• Next pull the waste box to the front'.

[18] Opening the waste box

Empty the box.

Close the waste box.
• First push the waste box forward.
• Next push the waste box to the right-hand side.

[19] Closing the waste box

Empty the waste box of the reinforcement unit

264

Chapter 6 - Maintain the Printing System

Summary of Contents for Oce PlotWave 450











































































































































































































































































































































Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands

Canon Oce PlotWave 450, Operation Manual

Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands