Canon Oce PlotWave 450 Operation Manual Download Page 302

Page: 302 / 330

Event messages

Introduction

Feedback on errors related to print jobs is displayed in the event list.

You can open the event list when you click [View events] in the upper right hand corner of the
Jobs tab in Océ Express WebTools.

Procedure

Event message

Troubleshoot

[Partially printed job aborted due to
reception problem (protocol error,
connection failure, spool full)]

• Check the structure and keywords of the Job Ticket.
• When the user panel displays the message [Job mem-

ory full], delete some jobs from the system.

• Check if the printer can be reached on the network.

[Job aborted due to reception prob-
lem (protocol error, connection fail-
ure, spool full); nothing was printed]

• Check the structure and keywords of the Job Ticket.
• When the user panel displays the message [Job mem-

ory full], delete some jobs from the system.

• Check if the printer can be reached on the network.

[Document could not be printed; spe-
cific TIFF/CALS mode is not suppor-
ted]

The document type is not supported by the printer (for
instance, CALS file of type 2).
• Generate a new file.

[Document could not be processed;
processing was aborted]

The file is complex and the printer does not have
enough memory to process it.
• Try to print it from an application using the Océ Wide

format Printer Driver for Microsoft

Windows

• If the error persists, contact your local Service repre-

sentative.

[PS/PDF missing or invalid data in
the document; one or more pages
not correctly printed]

The Postscript or PDF file is corrupt.
• Try to print the original file from Adobe Reader or di-

rectly from the application using the Océ Wide format
Printer Driver for Microsoft

Windows

• Try to generate the file again.
• If the error persists, contact your local Service repre-

sentative.

[PS/PDF limitation; one or more pa-
ges not correctly printed]

The Postscript or PDF file causes an internal printer er-
ror.
• Try to print it from an application using the Océ Wide

format Printer Driver for Microsoft

Windows

• If the error persists, contact your local Service repre-

sentative.

[PS/PDF resource issue (memory,
disk); one or more pages not correct-
ly printed]

The Postscript or PDF file is complex and the printer
does not have enough memory to process it.
• Try to print it from an application using the Océ Wide

format Printer Driver for Microsoft

Windows

• If the error persists, contact your local Service repre-

sentative.

Event messages

302

Chapter 9 - Solve Problems

Summary of Contents for Oce PlotWave 450











































































































































































































































































































































Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands

Canon Oce PlotWave 450, Operation Manual

Search results

Summary of Contents for Oce PlotWave 450

Reviews:

Related manuals for Oce PlotWave 450

Brands by name

Popular brands