Protocol Settings
4-4
4
Using an AppleT
alk Netw
or
k
Protocol Settings
This section describes procedures for setting up the machine’s Ethernet driver and AppleTalk proto-
col. These settings are entered from the machine’s control panel.
NOTE
• If you are able to use the TCP/IP protocol, and have a Windows computer connected to a TCP/IP network,
you can enter settings from the Remote UI. (The Remote UI enables you to enter a variety of settings for
the machine from a computer with a web browser.) For instructions on using the Remote UI, see the
Remote UI User’s Guide
.
Settings from the Control Panel
IMPORTANT
• Settings from the control panel become effective when the machine is restarted (using the power
switches).
• For details about entering characters using the touch panel display, see the
User’s Guide
.
Setting Up the Ethernet Driver
For Ethernet driver settings, see “Setting Up the Ethernet Driver,” on p. 2-5.
Setting Up AppleTalk
1
Press the
key.
2
Press the [System Settings] key.
IMPORTANT
• If the message “Enter System Manager ID and
Password using the numeric keys,” appears in
the touch panel display, enter the System Man-
ager ID and password. For instructions on enter-
ing the System Manager ID and password, see
the
User's Guide
.
Additional
Functions
00̲MFPNG.book 4 ページ ２０００年４月２６日 水曜日 午後５時１１分
