Protocol Settings
2-6
2
Using a
TCP/IP Netw
or
k
3
Press the [Network Settings] key.
4
Press the [Ethernet Driver Settings]
key.
5
Select Auto Detect [On] or [Off].
●
If [On] is selected
Determines the communication mode
(Half duplex/Full duplex) and Ethernet
type (10 Base-T/100 Base-TX)
automatically. Go to step 8.
●
If [Off] is selected
Enables you to enter the
communication mode (Half duplex/Full
duplex), and Ethernet type (10 Base-T/
100 Base-TX) manually. Go to step 6.
NOTE
• The factory setting is [On]. Use the [Off]
setting to specify a particular Ethernet set-
ting.
00̲MFPNG.book 6 ページ 2000年4月26日 水曜日 午後5時11分