Protocol Settings
2-7
2
Using a
TCP/IP Netw
or
k
Continue to the next section and set the IP address.
Setting the IP Address
NOTE
• When settings are made using DHCP, BOOTP, or RARP, the setting values will appear on the TCP/IP Set-
tings screen after the machine is restarted. (If the IP address, host name, and domain name have been
set previously, these will be overwritten by the settings made using DHCP, BOOTP, or RARP.)
6
Select the Communication Mode.
Select the appropriate communication mode for your network environment.
●
When [Half Duplex] is selected
Sending and receiving is alternated.
●
When [Full Duplex] is selected
Sending and receiving is simultaneous.
7
Select the Ethernet Type.
Select the appropriate Ethernet type for your network environment.
●
When [10 Base-T] is selected
The network is compatible with 10 Base-T connections.
●
When [100 Base-TX] is selected
The network is compatible with 100 Base-TX connections.
8
Confirm the settings you entered and press the [OK] key.
The display returns to the Network Settings screen.
1
Press the
key.
2
Press the [System Settings] key.
IMPORTANT
• If the message “Enter the System Man-
ager ID and Password using the numeric
keys” appears in the touch panel display,
enter the System Manager ID and pass-
word. For instructions on entering the Sys-
tem Manager ID and password, see the
User's Guide
.
Additional
Functions
00̲MFPNG.book 7 ページ ２０００年４月２６日 水曜日 午後５時１１分
