Setting Up a Computer for Printing
3-12
3
Using a NetW
are Netw
or
k
(Windo
ws)
Setting Up a Computer for Printing
After you have finished making the NetWare print service and protocol settings, you can enter set-
tings for each of the computers to be used.
Connecting to a NetWare Network
Install NetWare client software on all computers that will perform printing, so that they are able to
use the NetWare network. For details, see your NetWare manuals and operating system manuals.
Installing Printer Drivers
Printing from a computer requires the installation of a printer driver. If you are using PCL, refer to the
PCL Driver Guide
for installation instructions. If you are using PostScript, refer to the
Setup Guide
for installation instructions. In the installation procedure, select the network printer as the printer
destination, and select the print queue that you created in “
NetWare Print Service Settings
,” on p. 3-
4.
Setting the Printer Destination
(If you set up the printer destination when you installed the printer driver, this step is not necessary.)
On the Start menu, select Setting, Printer, then right-click the icon of the printer you will use for print-
ing and select Properties from the pop-up menu.
Click Details tab or Port tab to display the Details sheet or the Port sheet, and set the printer desti-
nation port to the print queue you created in “
NetWare Print Service Settings
,” on p. 3-4. Click the
OK button to enable the settings.
00̲MFPNG.book 12 ページ ２０００年４月２６日 水曜日 午後５時１１分
