Protocol Settings
3-11
3
Using a NetW
are Netw
or
k
(Windo
ws)
The protocol settings are now complete.
7
Select the Print Service from the drop-down list box.
Select the print service setting used in “
NetWare Print Service Settings
.” (See p. 3-4).
NOTE
• The following print services are available:
- Bindery PServer:
Used in the queue server mode (Bindery mode print service).
- RPrinter:
Used in the remote printer mode (Bindery mode print service).
- NDS PServer:
Used in the queue server mode (NDS print service).
- NPrinter:
Used in the remote printer mode (NDS print service).
8
Press the [Settings] key on the right side to set the print service details. Enter the
same settings entered in “
NetWare Print Service Settings
.” (See p. 3-4.)
Settings differ depending on the print service. For print service settings, See “Control Panel
Menu List,” on p. 6-7.
To use a NDS PServer, enter the Tree name and Context for the print server in the Tree and
Context fields as follows:
If the Tree name is A1 and the Context is TOPMAX_SYS
Tree: A1
Context: o=TOPMAX_SYS
9
Confirm the settings you made and press the [OK] key.
10
Press the [Done] key.
Repeat until the Additional Functions screen closes.
11
Restart the machine.
Turn the printer unit power switch, the scanner unit power switch, and the control panel
power switch to OFF; and then turn the power to ON after waiting at least 3 seconds.
00̲MFPNG.book 11 ページ ２０００年４月２６日 水曜日 午後５時１１分
