File Sharing Settings
2-25
2
Using a
TCP/IP Netw
or
k
File Sharing Settings
This section explains how to set up a computer on your network as a file sharing server.
These settings enable you to send files from your machine to the file sharing server.
IMPORTANT
• This section describes procedures for entering file sharing settings on the server side only. To send files
from the machine to a server on the network, you must enter an address setting from either the control
panel or the Remote UI. For instructions on using the control panel, see the
User’s Guide
.
For instructions
on using the Remote UI, see the
Remote UI User’s Guide
.
Using Windows 95/98
IMPORTANT
• The machine is not compatible with the NetBIOS scope ID. Do not set up a scope ID on the file sharing
server.
NOTE
• When using Windows NT or Windows 2000 on a network, it is recommended that these settings be made
on a file server.
1
Right-click the Network Neighborhood
icon on the screen, and then select
Properties.
●
In The following network components
are installed column, confirm that both
Client for Microsoft Networks and File
and printer sharing for Microsoft Net-
works appear in the list box. For Win-
dows 95, confirm that Microsoft
Network Client appears. If not, click the
Add... button and install these compo-
nents.
●
Click the File and Print Sharing... but-
ton, select “I want to be able to give oth-
ers access to my files,” and click the OK
button.
00̲MFPNG.book 25 ページ ２０００年４月２６日 水曜日 午後５時１１分
