NetWare Print Service Settings
3-7
3
Using a NetW
are Netw
or
k
(Windo
ws)
4
Assign the printer to the print server.
●
From the Available Option menu, select Print Server Information then press the Enter key.
●
Select the print server you set up in Step 2, then press the Enter key.
●
Select Print Server Configuration, then press the Enter key.
●
Select Printer Configuration, then press the Enter key.
●
From the Configured Printers list box select the number of the printer you want, then press the
Enter key.
5
Set up the printer name, type, etc.
●
In the Name area, enter the name you want to use for the printer, and then press the Enter
key.
●
Set up the Type. If you are using queue server mode, select Defined elsewhere, or if you are
using remote printer mode, select Remote Parallel and set the Port to LPT 1.
●
Enter the remaining items, then press the ESC key.
●
In the confirmation box that opens, select Yes, then press the Enter key.
●
Press the ESC key to return to the Print Server Configuration Menu.
6
Assign the printer to a queue.
●
Select Queues Serviced by Printer and press the Enter key.
●
Select the name of the printer you set up in Step 5, then press the Enter key.
●
Press the Insert key.
●
Select the queue you set up in Step 3, then press the Enter key.
NOTE
• Make sure to remember the printer number. You need it to enter the machine’s protocol settings.
7
Press the ESC key until you return to the Exit PConsole window, then select Yes to quit
PCONSOLE.
8
If you are using remote printer mode, use the following procedure to restart the print
server.
(This is not required if you are using queue server mode.)
●
If you are using a NetWare file server as a print server, enter “LOAD PSERVER.NLM <print
server name>” from the file server, and then press the Enter key.
●
If you are using a dedicated print server, enter PSERVER.EXE and the name of the print
server from the computer, and then press the Enter key.
00̲MFPNG.book 7 ページ ２０００年４月２６日 水曜日 午後５時１１分
