Periodic Inspection of the Breaker
xxv
xxv
xxv
xxv
2
2
2
2
Make sure that the breaker lever automatically goes to the OFF position
Make sure that the breaker lever automatically goes to the OFF position
Make sure that the breaker lever automatically goes to the OFF position
Make sure that the breaker lever automatically goes to the OFF position
(“
” side), and confirm that the power is cut OFF.
(“
” side), and confirm that the power is cut OFF.
(“
” side), and confirm that the power is cut OFF.
(“
” side), and confirm that the power is cut OFF.
IMPORTANT
••••
Do not use the test button to turn the power ON and OFF.
••••
If the breaker lever does not go to the OFF position (“
” side) repeat step 1.
••••
If the breaker lever does not go to the OFF position (“
” side) despite carrying out the above procedure two or
three times, contact your service representative.
••••
The breaker lever may stop between ON and OFF, depending on the type of breaker.
••••
When the breaker lever is stopped between ON and OFF, it is in an OFF state.
3
3
3
3
Once the step above is completed and confirmed, turn the main power
Once the step above is completed and confirmed, turn the main power
Once the step above is completed and confirmed, turn the main power
Once the step above is completed and confirmed, turn the main power
switch OFF (
switch OFF (
switch OFF (
switch OFF (
side).
side).
side).
side).
ON
(“IIII” side)
OFF
(“
” side)
ON
(“IIII” side)
OFF
(“
” side)
ON
(“IIII” side)
OFF
(“
” side)
Summary of Contents for iR2200 Series
Page 110: ...Printing Secured Documents 2 18 2 18 2 18 2 18 2 2 2 2 Checking Job and Device Status ...
Page 212: ......
Page 338: ...Card Reader C1 7 90 7 90 7 90 7 90 7 7 7 7 Handling Options ...
Page 362: ......