Canon iR2200 Series Reference Manual Download Page 210

Page: 210 / 362

Consumables and Options

5-24

Rout

ine

int

enan

Black Toner

Black Toner
When the <Add toner.> message appears on the touch panel display, add toner which has
been approved for use with this machine.

WARNING

••••

Never dispose of waste toner in a fire or incinerator. Doing so may result in an explosion.

CAUTION

••••

Do not store toner cartridges in places exposed to open flames, as this may cause the toner to

ignite and result in burns or a fire.

IMPORTANT

••••

Store toner cartridges in a cool location away from direct sunlight.

- The recommended storage conditions are: temperature below 30°C, and humidity below 80%.

Stamp Car tridge

This ink cartridge is used to stamp originals when they are sent. (For the Fax function.)

Summary of Contents for iR2200 Series











































































































































































































































































































































































Search results

Summary of Contents for iR2200 Series

Reviews:

Related manuals for iR2200 Series

Brands by name

Popular brands

Canon iR2200 Series, Reference Manual

Search results

Summary of Contents for iR2200 Series

Reviews:

Related manuals for iR2200 Series

Brands by name

Popular brands