Canon iR2016 Series Facsimile Manual Download

Page: 212 / 232

Menu Descriptions

10-12

ine Setti

An asterisk (*) indicates the default settings.

3. ACTIVITY REPORT

Enables/disables automatic printing of a
transaction report after every 40 transactions.

1. AUTO PRINT

Sets whether an activity report is printed
automatically every 40 transactions.

OUTPUT YES

Enables automatic printing of an activity report.

OUTPUT NO

Disables automatic printing of an activity report.

2. TX/RX SEPARATE

Sets whether to list transmission and reception
results separately in a report.

OFF*

The activity report does not list transmission and
reception results separately.

The activity report lists transmission and reception
results separately.

2. LIST PRINT

Prints reports/lists such as ACTIVITY REPORT,
SPEED DIAL LIST and USER DATA LIST.

1. ACTIVITY REPORT

Prints a report manually before it is printed
automatically after every 40 transactions.

2. SPEED DIAL LIST

Prints the list of the fax/telephone numbers
registered for one-touch speed dialing keys, coded
speed dialing codes, or group dialing.
1-TOUCH LIST, CODED DIAL LIST, GROUP DIAL
LIST

3. ADD BOOK DETAILS

Prints a detailed list of the fax/telephone numbers
registered for one-touch speed dialing or coded
speed dialing.
1-TOUCH (DETAILS), CODED (DETAILS)

4. USER DATA LIST

Prints out a list of items set or registered in the
Menu.

Name

Descriptions

Summary of Contents for iR2016 Series









































































































































































































































Search results

Summary of Contents for iR2016 Series

Reviews:

Related manuals for iR2016 Series

Brands by name

Popular brands

Canon iR2016 Series, Facsimile Manual

Search results

Summary of Contents for iR2016 Series

Reviews:

Related manuals for iR2016 Series

Brands by name

Popular brands