Canon iR2016 Series, Facsimile Manual

Page: 53 / 232

Placing Originals 1-37
Bef
o
re Y
ou Star
t
Us
ing This Mac
h
ine
1
Feeder (DADF-P1)
You should use the feeder when you want to scan several originals at the same
time. Place the originals into the feeder and press [Start]. The machine
automatically scans the originals into memory. In addition, the both sides of a
two-sided original can be scanned automatically without the need for turning over
the sheet manually.
You can place the following originals into the feeder’s original supply tray:
•
Weight:
- 37 g/m
2
to 128 g/m
2
•
Size:
- A3, A4, A4R, A5, A5R
•
Tray Capacity:
- 50 sheets (52 g/m
2
to 80 g/m
2
)
- 25 sheets (81 g/m
2
to 105 g/m
2
)
IMPORTANT
•
Do not place the following types of originals into the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which may not feed smoothly
- Transparencies and other highly transparent originals
•
If the same original is fed through the feeder repeatedly, the original may fold or become
creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times
(this number varies, depending on the type and quality of the original).
•
If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder
cleaning procedure. (See Chapter 7, “Routine Maintenance,” in the Reference Guide.)
•
Always smooth out any folds in your originals before placing them into the feeder.
•
Set the originals one by one if they are very thin (37 g/m
2
to 51 g/m
2
) or very thick (105 g/
m
2
to 128 g/m
2
).