Canon iR2016 Series, Facsimile Manual

Page: 62 / 232

Dialing Methods 2-4
Ba
sic Se
nding Me
tho
d
s
2
IMPORTANT
You cannot insert a pause at the beginning of a number.
NOTE
•
You can enter a maximum of 120 characters for the fax number.
•
If you enter a pause at the end of the number, the pause is always 10 seconds
long.
•
You can press [ ] to delete the last character entered.
•
To delete all of the entered characters, press (Clear).
3
Press [Start].
If the original is placed on the platen glass, follow the instructions that appear on
the LCD display
➞
press (Start) once for each original. When scanning is
complete, press [OK].
Scanning starts.
The scanned data is sent to the destination once scanning is complete.
[Redial/Pause]: Press to insert a pause of several seconds in the fax number that
you are dialing. If you insert a pause within the fax number, the
letter <p> is displayed between the numbers. If you insert a pause
at the end of a fax number, the letter <P> appears. When dialing
an overseas number, insert a pause after the country code, and
at the end of the telephone number. (See “Pause Time,” on
p. 6-15.)
(Tone): Press when you want to call directly to an extension line that is
connected to a PBX (Private Branch Exchange), which accepts
only tone signals. If you press
(Tone), the letter <T> appears.
(See “The Fax Information Service,” on p. 3-21.)
[Direct TX]: Press to send documents directly to the recipient. If you do not
select Direct Sending, Memory Sending is used. (See “Direct
Sending,” on p. 3-4.)
[Hook]: Press to use tone dialing.