Canon iR2016 Series Facsimile Manual Download

Page: 57 / 232

Canceling Send Jobs

1-41

Bef

re Y

ou Star

ing This Mac

ine

Press [

] to select <YES>.

After you press [

] to cancel the transmission, an alarm sounds, and a report

automatically prints, unless this feature has been turned off. (See <1. AUTO
PRINT> of “LIST PRINT,” on p. 10-12.)

Scanning or sending stops.

NOTE

•

Sending is not canceled until you select <YES>.

•

If you cancel during Direct Sending, you may have to open the feeder cover to
remove your document.

•

If you cancel a transmission, the paper may remain in the feeder. In this case,
press [OK] so that the paper remaining in the feeder is discharged.

Using the System Monitor Key

You can cancel send jobs in memory (i.e., Automatic Redialing or Memory
Sending).

Follow the procedure below to cancel send jobs in memory.

Press [System Monitor].

Press [

] or [

] until <RX/TX STATUS> appears

➞

press

[OK].

Summary of Contents for iR2016 Series









































































































































































































































Search results

Summary of Contents for iR2016 Series

Reviews:

Related manuals for iR2016 Series

Brands by name

Popular brands

Canon iR2016 Series, Facsimile Manual

Search results

Summary of Contents for iR2016 Series

Reviews:

Related manuals for iR2016 Series

Brands by name

Popular brands