Canon iR2016 Series Page 35 Facsimile Manual Download

Page: 35 / 232

Things You Must Do Before Using This Machine

1-19

Bef

re Y

ou Star

ing This Mac

ine

Setting the Current Date and Time

You can set the current date and time. The current date and time are used as
standard timer settings for functions that require them.

If necessary, you can also set “Daylight Saving Time”.

In some countries, time is advanced throughout summer season. The period in
which this is applied is called “Daylight Saving Time.”

NOTE

•

You can print the USER DATA LIST to check the current setting. (See “Printing the USER
DATA LIST,” on p. 8-13.)

•

You can set the date format to be used on the LCD display. (See Chapter 5, “Customizing
Settings,” in the Reference Guide.)

Press [Additional Functions]

➞

[

] or [

] until <TIMER

SETTINGS> appears

➞

press [OK].

Press [

] or [

] until <DATE&TIME SETTING> appears

➞

press [OK].

Summary of Contents for iR2016 Series









































































































































































































































Search results

Summary of Contents for iR2016 Series

Reviews:

Related manuals for iR2016 Series

Brands by name

Popular brands

Canon iR2016 Series, Facsimile Manual

Search results

Summary of Contents for iR2016 Series

Reviews:

Related manuals for iR2016 Series

Brands by name

Popular brands