Canon iPF8400S Series Basic Manual Download Page 4

Page: 4 / 160

iPF8400S Basic Guide

eface

Prec

auti
ons

Moving the Printer

Caution

• Moving the printer requires at least six people, holding it on both sides. Be careful to avoid

back strain and other injuries.

• When moving the printer, firmly grasp the Carrying Handles under each side. The printer may

be unsteady if you hold it at other positions, which poses a risk of injury from dropping the

printer.

Printhead, Ink Tanks, and Maintenance Cartridge

Caution

• Always store consumables in a safe location out of the reach of small children. If a child licks or

ingests ink accidentally, seek medical assistance immediately.

• If ink accidentally gets in your eyes, immediately rinse with water.

If ink gets on your skin, immediately clean it off with soap and water.

If irritation persists in your eyes or on your skin, contact a physician immediately.

• Avoid dropping or shaking printheads, ink tanks, and maintenance cartridges. Spilled ink can

stain clothing and the work area.

• Never touch the electrical contacts of the Printhead after printing. The contacts become

extremely hot and can cause minor burns.

Other

Warning

• Never disassemble the printer or attempt repairs. There are high voltage parts inside the

printer that can cause a fire or electrical shock.

• Never use flammable sprays around the printer. The gas of flammable sprays can cause a fire

or electrical shock, if it contacts high voltage points inside the printer.

• After removing the Cutter Unit, never touch

the cutting edge (a). This could cause

personal injury.

Caution

• Never insert your hand into the printer while it is printing. Moving parts inside the printer can

cause injuries.

• Never place anything on the printer such as small metal objects (paper clips, staples), liquids,

any type of liquid container that contains flammable liquids (alcohol, benzene, etc.). If such

objects fall into the printer, this could cause a fire or electrical shock.

• To prevent a fire hazard or dangerous electric shock, if a foreign object falls into or a liquid

spills into the printer, press the Power button immediately to switch the printer off, unplug the

printer power cable from the outlet, and then call for service. If you continue to use the printer,

this could cause a fire or electrical shock.

Summary of Contents for iPF8400S Series

































































































































































Search results

Summary of Contents for iPF8400S Series

Reviews:

Related manuals for iPF8400S Series

Brands by name

Popular brands

Canon iPF8400S Series, Basic Manual

Search results

Summary of Contents for iPF8400S Series

Reviews:

Related manuals for iPF8400S Series

Brands by name

Popular brands