iPF8400S Basic Guide
135
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pa
per
The paper is too small.
Replace paper with A4/LTR (vertical) or larger
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print
a test print sheet or other printer
status information.)
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1. Press
▲
or
▼
to select
Change Paper
, press the
OK
button, and remove the
paper.
(See "Removing Sheets.")
➔
P.24
2. Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
➔
User's Guide
The printer will resume printing.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
Replace roll with 10 in. wide or larger roll.
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet or
other printer status information.)
Replace the roll with a roll 10 inches in width or larger as
follows.
1. Press
▲
or
▼
to select
Change Paper
, and then press
the
OK
button.
(See "Removing the Roll from the Printer.")
➔
P.18
(See "Removing Rolls From the Roll Holder.")
➔
User's
Guide
2. Replace the roll with a roll 10 inches wide or larger.
(See "Attaching the Roll Holder to Rolls.")
➔
P.12
(See "Loading Rolls in the Printer.")
➔
P.14
The printer will resume printing.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
PaprWidth Mismatch
Cause
Corrective Action
When
Detect Mismatch
in the Control Panel menu is set to
Pause
or
Hold Job
, the width of the loaded roll does not
match the width specified in
Fit Roll Paper Width
in the
printer driver.
Press
▲
or
▼
to select
, and then press the
OK
button to resume printing.
However, note that this error may cause paper jams and
affect the printing quality.
Press
▲
or
▼
to select
Stop Printing
, and then press the
OK
button.
Follow these steps to replace the roll to match the width
specified in the printer driver.
1. Press
▲
or
▼
to select
Change Paper
, and then press
the
OK
button.
(See "Removing the Roll from the Printer.")
➔
P.18
(See "Removing Rolls From the Roll Holder.")
➔
User's
Guide
2. Replace with paper of the width configured in the printer
driver.
(See "Attaching the Roll Holder to Rolls.")
➔
P.12
Summary of Contents for iPF8400S Series
Page 159: ...159 Memo...