iPF8400S Basic Guide
124
Tro
ubl
esho
otin
g
P
rob
lem
s w
ith t
he p
rin
tin
g q
ualit
y
Lines or colors are misaligned
Cause
Corrective Action
The Printhead is not being
aligned correctly.
Adjust the Printhead alignment.
(See "Automatic Adjustment to Straighten Lines and Colors.")
➔
P.97
(See "Manual Adjustment to Straighten Lines and Colors.")
➔
User's Guide
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing
paper, set the optimal Printhead height before aligning the printhead.
(See "Enhancing Printing Quality.")
➔
User's Guide
In the Control Panel menu, use a lower
Head Height
setting.
(See "Troubleshooting Paper Abrasion and Blurry Images.")
➔
User's Guide
The type of paper specified
in the printer driver does not
match the type loaded in the
printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
➔
P.14
(See "Loading Sheets in the Printer.")
➔
P.21
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1. Press the
Stop
button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Depending on the type of
paper, printed lines may be
noticeably misaligned.
Specify
Proof
in
Print Priority
in the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.")
➔
User's
Guide
Borders appear in borderless printing
Cause
Corrective Action
If borderless printing was performed at the
actual size, paper wider than the page size
was selected.
When performing borderless printing at the actual size, use roll paper
with the same width as the width of the page size.
(See "Borderless Printing at Actual Size.")
➔
User's Guide
The printing image data has margins.
Check that the printing image data does not have any objects like crop
marks and transparent objects.
Margins are configured in the application
software you are using.
Check that no margins are configured in the application software you
are using.
BordlessOversize
is set to
Little
in the
Control Panel menu.
Set
BordlessOversize
to
Standard
in the Control Panel menu.
(See "Menu Settings.")
➔
User's Guide
Summary of Contents for iPF8400S Series
Page 159: ...159 Memo...
