iPF8400S Basic Guide
141
Er
ror M
essa
ge
Me
ssa
ges
r
egar
ding
pa
per
Cause
Corrective Action
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
➔
P.14
(See "Loading Sheets in the Printer.")
➔
P.21
Cannot cut this paper.
Cause
Corrective Action
There are sheets left on the
Ejection Guide.
1. Lift the Release Lever and remove the paper.
2. Load paper.
3. Lower the Release Lever.
4. If
Not finished printing. Finish printing remaining jobs?
is shown on the
Display Screen, press the
OK
button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
➔
P.14
There is a foreign object by the
Output Tray, obstructing the
Cutter Unit.
1. Lift the Top Cover and remove the foreign object.
2. If
Not finished printing. Finish printing remaining jobs?
is shown on the
Display Screen, press the
OK
button.
Printing will resume, starting from the page on which the error occurred.
You are not using the printer
under the recommended
environmental conditions for the
paper.
Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various
types of paper. For details on the recommended environmental conditions, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
You are using paper that is not
compatible with automatic cutting.
1. Specify
Manual
as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
➔
User's Guide
For information about paper that is compatible with automatic cutting, see the
Paper Reference Guide.
(See "Paper Reference Guide.")
2. Lift the Release Lever and remove the paper.
In other cases, the Cutter Unit
may be damaged.
Contact your Canon dealer for assistance.
End of paper feed.
Cause
Corrective Action
Although an attempt was made to advance the paper manually, it
reached the limit position that can be advanced.
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
➔
User's
Guide
Paper can be retracted only up to 17 mm (0.7 in) when using the Media
Take-up Unit.
Canceling manual advancing.
Rel lever is in wrong position.
Cause
Corrective Action
The Release Lever is up.
Lower the Release Lever.
If the error occurs again, turn off the printer and wait a while
before restoring power.
Summary of Contents for iPF8400S Series
Page 159: ...159 Memo...
