Canon iPF8400S Series Basic Manual Download Page 22

Page: 22 / 160

iPF8400S Basic Guide

Handl

ing
P

ape

andli
ng shee

Note

• If any paper has been advanced that will not be used, a message is shown requesting

you to remove it.

Press

▲

▼

to select

Yes

, and then press the

button. Remove the paper and go

to the next step.

Lift the Release Lever and open the Top Cover.

Important

• Do not touch the Linear Scale (a),

Carriage Shaft (b), or Fixed Blade (c).

This may stain your hands and damage

the printer.

With a sheet lengthwise and printing-side up, insert it between the Platen (a) and the Paper
Retainer (b). Align the edges of the sheet as follows.

1. Align the sheet with the Paper Alignment Line (c) at right.

Summary of Contents for iPF8400S Series

































































































































































Search results

Summary of Contents for iPF8400S Series

Reviews:

Related manuals for iPF8400S Series

Brands by name

Popular brands

Canon iPF8400S Series, Basic Manual

Search results

Summary of Contents for iPF8400S Series

Reviews:

Related manuals for iPF8400S Series

Brands by name

Popular brands