Canon iPF5000 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 313 / 390

Chapter 6
6-17
T-6-11
T-6-12
T-6-13
T-6-14
J2601 (Operation panel)
Pin Number Signal name IN/OUT Function
1 POWER_ON IN Power switch signal
2 PM_START OUT Power supply (+5V)
3 BUZZER OUT Buzzer control signal
4 PDODATA OUT Panel IC control signal
5 +3.3V OUT Power supply (+3.3V)
6 PDI_DATA IN Panel IC data signal
7 GND - GND
8 /PANEL RESET OUT Panel reset signal
9 GND - GND
10 PDOPCLK OUT Panel IC clock signal
11 PANEL_5V OUT Power supply (+5V)
12 /PDOCS_L OUT Panel supply chip select signal
J2701 (Cutter unit)
Pin Number Signal name IN/OUT Function
1 OPT_5V OUT Power supply (+5V)
2 GND - GND
3 CUTTER_L_SNS IN Cutter HP sensor signal
4 CUTTER_R_SNS IN Cutter right detection sensor signal
5 CUTTER_POS1_SNS IN Cutter lift sensor signal
6 CUTTER_UNIT IN Cutter unit detection signal
7 CUTTER_VM OUT Power supply (+26V)
8 /CUTTER_SLEEP OUT Cutter motor driver sleep signal
9 CUTTER_STB OUT Cutter motor driver strobe signal
10 CUTTER_DAT OUT Cutter motor driver data signal
11 CUTTER_CLK OUT Cutter motor driver clock signal
12 CUTTER_ENB OUT Cutter motor driver enable signal
13 CUTTER_PHS OUT Cutter motor driver phase signal
14 GND - GND
J2702 (Cassette)
Pin Number Signal name IN/OUT Function
1 CST_OUTB OUT Cassette motor drive signal B
2 CST_OUTA OUT Cassette motor drive signal A
3 GND - GND
4 CST_ENCA IN Cassette encoder output signal A
5 SNS_5V OUT Power supply (+5V)
6 CST_ENCB IN Cassette encoder output signal B
7 SNS_3V_1 OUT Power supply (+3.3V)
8 GND - GND
9 CST_CAM_SNS Cassette cam sensor output signal
10 SNS_3V_1 OUT Power supply (+3.3V)
11 GND - GND
12 CST_EARLY_SNS IN Cassette pick-up sensor output signal
13 SNS_3V_1 OUT Power supply (+3.3V)
14 GND - GND
15 CST_UNIT_SNS IN Cassette detection sensor output signal
J2703 (Auto feed roll unit)
Pin Number Signal name IN/OUT Function
1 OPT_5V OUT Power supply (+5V)
2 GND - GND
3 ROLL_CAM_SNS IN Roll cam sensor signal
4 ROLL_PAPER_SNS IN Roll media sensor signal
5 ROLL_UNIT IN Roll unit detection signal
6 VM OUT Power supply (+26V)
7 VM OUT Power supply (+26V)
8 /ROLL_SLEEP OUT Roll motor driver sleep signal
9 ROLL_STB OUT Roll motor driver strobe signal