manualshive.com logo in svg

Canon iPF5000 - imagePROGRAF Color Inkjet Printer, Service Manual

The Canon iPF5000 - imagePROGRAF Color Inkjet Printer is a high-quality printing solution for professionals. With its exceptional color accuracy and precision, this printer delivers stunning results. To fully utilize its features, you can easily download the free Brochure & Specs manual from manualshive.com, providing detailed instructions and specifications.

Share
Download
background image

Chapter 2

2-33

2.3.2.7 Air Flow

2.3.2.7.1 Air flow

0013-4162

iPF5000

This printer has two fans, a mist fan used to collect mist and a suction fan used to suck media onto the platen.
Ink mist that floats inside the printer and ink splashes from the media are collected in the filter through the front duct and the air flow path inside the printer by the
driving of the mist fan, thus preventing mist from discharged outside the printer. 

F-2-23

During operation of the suction fan, suspended substances are collected in the filter through the airflow path inside the printer, preventing them from being emitted
to outside of the printer. 

F-2-24

2.3.2.7.2 Air flow

0016-8199

iPF5000 / iPF5100

This printer has two fans, a mist fan used to collect mist and a suction fan used to suck media onto the platen.
Ink mist that floats inside the printer and ink splashes from the media are collected in the filter through the front duct and the air flow path inside the printer by the
driving of the mist fan, thus preventing mist from discharged outside the printer. 

Mist fan

Fan filter

Fan filter

Suction fan

Summary of Contents for iPF5000 - imagePROGRAF Color Inkjet Printer







































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF5000 - imagePROGRAF Color Inkjet Printer

Wang 632 Maintenance Manual preview
632
Brand: Wang Pages: 139
Roland SolJet Pro II Conversion Procedure preview
SolJet Pro II
Brand: Roland Pages: 9
GCC Technologies EP-60 User Manual preview
EP-60
Brand: GCC Technologies Pages: 76

Brands by name

Popular brands

Load more brands