Canon iPF5000 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 314 / 390

Chapter 6
6-18
T-6-15
T-6-16
T-6-17
T-6-18
T-6-19
10 ROLL_DAT OUT Roll motor driver data signal
11 ROLL_CLK OUT Roll motor driver clock signal
12 GND - GND
13 GND - GND
J2801 (Feed motor)
Pin Number Signal name IN/OUT Function
1 LF_OUTB OUT Feed motor drive signal B
2 LF_OUTA OUT Feed motor drive signal A
J2901 (Purge unit)
Pin Number Signal name IN/OUT Function
1 PUMP_OUTB OUT Pump motor drive signal B
2 PUMP_OUTA OUT Pump motor drive signal A
3 GND - GND
4 PUMP_ENCA IN Pump encoder output signal A
5 SNS_5V Power supply (+5V)
6 PUMP_ENCB IN Pump encoder output signal B
7 PUMP_CAM_3V OUT Power supply (+3.3V)
8 GND - GND
9 PUMP_CAM_SNS_OUT IN Pump cam sensor output signal
J3001 (Lift motor/head management sensor)
Pin Number Signal name IN/OUT Function
1 LIFTOUTCOM OUT Lift motor Power supply
2 LIFT_OUTAP OUT Lift motor drive signal AP
3 LIFT_OUTAM OUT Lift motor drive signal AM
4 LIFT_OUTBP OUT Lift motor drive signal BP
5 LIFT_OUTBM OUT Lift motor drive signal BM
6 GND - GND
7 FUTO_CLMP OUT Head management sensor unit clamp signal
8 FUTO_XLEDON OUT Head management sensor unit LED ON/OFF signal
9 SNS_5V Power supply (+5V)
10 FUTO_XCMP0 IN Head management sensor unit skew detection signal
11 SNS_3V_1 OUT Power supply (+3.3V)
12 GND - GND
13 PE_SNS IN Paper detection sensor output signal
J3101 (Carriage motor)
Pin Number Signal name IN/OUT Function
1 CR_HWP IN Carriage motor hole device W-phase + signal
2 CR_HWM IN Carriage motor hole device W-phase - signal
3 CR_W OUT Carriage motor W-phase drive signal
4 CR_HVM IN Carriage motor hole device V-phase - signal
5 CR_U OUT Carriage motor U-phase drive signal
6 GND - GND
7 CR_V OUT Carriage motor V-phase drive signal
8 RGV5 OUT Power supply (+5V)
9 N.C. - N.C
10 CR_HVP IN Carriage motor hole device V-phase + signal
11 CR_HUM IN Carriage motor hole device U-phase - signal
12 CR_HUP IN Carriage motor hole device U-phase + signal
J3201 (Valve motor,valve open/closed detection sensor,top cover sensor,ink tank cover switch)
Pin Number Signal name IN/OUT Function
1 TANK_COVER_SW IN Ink tank cover switch output signal
2 GND - GND
3 TOP_COVER_3V OUT Power supply (+3.3V)
J2703 (Auto feed roll unit)
Pin Number Signal name IN/OUT Function