manualshive.com logo in svg

Canon iPF5000 - imagePROGRAF Color Inkjet Printer, Service Manual

The Canon iPF5000 - imagePROGRAF Color Inkjet Printer is a high-quality printing solution for professionals. With its exceptional color accuracy and precision, this printer delivers stunning results. To fully utilize its features, you can easily download the free Brochure & Specs manual from manualshive.com, providing detailed instructions and specifications.

Share
Download
background image

Chapter 5

5-3

2) Press the [MENU] button to display the main menu.

3) Press the 

 and 

 buttons to select [Maintenance] and then press the 

 button.

4) Press the 

and 

 buttons to select [Platen Cleaning] and press the 

 button.

5) Press the 

 and 

 buttons to select [Yes] and press [OK] button.

6) Open the top cover.
7) If chad has deposited on suction port [1] on the platen or in borderless printing ink receiving channel [2], wipe it off with the cleaner brush.

F-5-2

MEMO:

Rinse the cleaner brush with water when it gets dirty.

8) Wipe off dirt inside the top cover with a cloth moistened with water and then wrung tight.  Wipe off ink smears from the entire surface of the platen, the pinch
roller unit, borderless printing ink receiving channel and else.

F-5-3

[1]

[2]

Summary of Contents for iPF5000 - imagePROGRAF Color Inkjet Printer







































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF5000 - imagePROGRAF Color Inkjet Printer

LPKF S104 Manual preview
S104
Brand: LPKF Pages: 54
Roland DXY-1100 Command Reference Manual preview
DXY-1100
Brand: Roland Pages: 156

Brands by name

Popular brands

Load more brands