Canon iPF5000 - imagePROGRAF Color Inkjet Printer, Service Manual

Page: 323 / 390

Chapter 6
6-27
T-6-33
T-6-34
T-6-35
10 GND - GND
11 VM IN Power supply (+26V)
12 GND - GND
13 VH_ENB OUT VH power supply ON/OFF signal
14 PW_CONT OUT Normal/power saving switch signal
J2511 (Connect to Spur motor / Spur cam sensor / Mist fan / Cutter motor / Cutter right detection sensor)
Pin Number Signal name IN/OUT Function
1 SNS_3V_1 OUT Power supply (+3.3V)
2 GND - GND
3 CUTTER_R_SNS_R IN Cutter right detection sensor signal
4 CUTTER_OUTA OUT Cutter motor driver signal A
5 CUTTER_OUTB OUT Cutter motor driver signal B
6 SNS_3V_1 OUT Power supply (+3.3V)
7 GND - GND
8 HAKUSHA_CAM_SNS_R IN Spur cam sensor output signal
9 HAKUSHA_MOTOR_AM OUT Spur motor drive signal AM
10 HAKUSHA_MOTOR_AP OUT Spur motor drive signal AP
11 FAN_VM OUT Power supply (+26V)
12 MIST_FAN_LOCK IN Mist fan lock signal
13 MIST_FAN_PWM OUT Mist fan duty control signal
14 GND - GND
J2512 (Suction fan / Maintenance cartridge relay PCB / Cassette paper detection sensor / Paper detection sensor / Lift cam sensor)
Pin Number Signal name IN/OUT Function
1 FAN_VM OUT Power supply (+26V)
2 PLATEN_FAN_LOCK IN suction fan lock signal
3 PLATEN_FAN_PWM OUT suction fan duty control signal
4 GND - GND
5 MENT_SDA IN/OUT Maintenance cartridge rom control signal (data)
6 MENT_SCL IN/OUT Maintenance cartridge rom control signal (clock)
7 GND - GND
8 MENT_3V Power supply (+3.3V)
9 SNS_3V_1 OUT Power supply (+3.3V)
10 GND - GND
11 CST_PAPER_NONE_SNS IN Cassette paper detection sensor output signal
12 SNS_3V_1 OUT Power supply (+3.3V)
13 GND - GND
14 PE_SNS IN Paper ditection sensor output signal
15 SNS_3V_1 OUT Power supply (+3.3V)
16 GND - GND
17 LIFT_CAM_SNS IN Lift cam sensor output signal
J2601 (Operation panel)
Pin Number Signal name IN/OUT Function
1 POWER_ON IN Power switch signal
2 PM_START OUT Power supply (+5V)
3 BUZZER OUT Buzzer control signal
4 PDODATA OUT Panel IC control signal
5 +3.3V OUT Power supply (+3.3V)
6 PDI_DATA IN Panel IC data signal
7 GND - GND
8 /PANEL RESET OUT Panel reset signal
9 GND - GND
10 PDOPCLK OUT Panel IC clock signal
J1801 (Connect to Power supply)
Pin Number Signal name IN/OUT Function