manualshive.com logo in svg

Canon iPF5000 - imagePROGRAF Color Inkjet Printer, Service Manual

The Canon iPF5000 - imagePROGRAF Color Inkjet Printer is a high-quality printing solution for professionals. With its exceptional color accuracy and precision, this printer delivers stunning results. To fully utilize its features, you can easily download the free Brochure & Specs manual from manualshive.com, providing detailed instructions and specifications.

Share
Download
background image

Chapter 1  

1-62

3. Vent holes

This printer has four vent holes, [1] to [4].  Do not block the vent holes when the printer is in service

F-1-57

4. Contact of Linear Scale/Carriage Shaft 

Please do not touch a linear scale and the carriage shaft when the inside of the top cover is opened, and execute maintenance.
When touching a linear scale and the carriage shaft, it might cause defective movement of the carriage and a defective print.

F-1-58

[1] Linear Scale 
[2] Carriage Shaft

5. Handling the Maintenance Cartridge

When removing the maintenance cartridge form the printer, use caution so that waste ink does not spatter.

6. Refilling the Printer with Ink

After removing the ink from inside the printer using the automatic or manual ink draining procedure to disassemble/reassemble or transport the printer, refill the
printer with ink as soon as possible upon completion of the work. 
If the ink remaining in the printer dries up, mechanical parts may be seized and malfunction may result.

[2]

[1]

[3]

[4]

[1]

[2]

Summary of Contents for iPF5000 - imagePROGRAF Color Inkjet Printer







































































































































































































































































































































































































Reviews:

No comments

Related manuals for iPF5000 - imagePROGRAF Color Inkjet Printer

Canon iPF710 - imagePROGRAF Color Inkjet Printer Service Manual preview
iPF710 - imagePROGRAF Color Inkjet Printer
Brand: Canon Pages: 238
GCC Technologies AR-24 User Manual preview
AR-24
Brand: GCC Technologies Pages: 70
Esko Kongsberg X Series User Manual preview
Kongsberg X Series
Brand: Esko Pages: 243

Brands by name

Popular brands

Load more brands