Canon Inner Finisher-K1, Service Manual

Page: 110 / 114

Checking After Installation
Disposal Parts Check
Following disposal parts are remained after installation
procedure.
[1]
Reverse Trailing Edge Guide (Installed to
the host machine)
1pc.
Operation Check
■ For imageRUNNER ADVANCE
C3500 Series
1.
Turn ON the main power of the host machine.
2.
If a message prompting the user to update the
version appears, press [Update] to automatically
update the version of this equipment.
NOTE:
If [Skip] is selected, a message prompting the user to
update the version will appear every time the host machine
is started.
In the service mode (Level 2) shown below, it is possible
to set not to display the message.
(Lv.2):
COPIER > OPTION > FNC-SW > VER-CHNG
3.
Check the paper feed and stapling operation and
others.
■ For imageRUNNER C3000 Series
1.
Turn ON the main power of the host machine.
NOTE:
If "E720-0000"error is displays, update the firmware of the
host machine to the latest version.
2.
Confirm that the combination of the firmware
version for host machine and this equipment.
3.
Check the paper feed and stapling operation and
others.
7. Installation
104