Canon Inner Finisher-K1, Service Manual

Page: 66 / 114

Removing the Stapler Unit
■ Preparation
1. Remove the machine from the host machine.
“Removing this Machine” on page 44
2. Remove the Front Cover Unit. “Removing the Front
Cover Unit” on page 51
■ Procedure
1. Remove the Stapler Unit [1] at the Stapler Mount.
• 1 Screw [2]
1x
[2]
[1]
[3]
NOTE:
In the diagrams, number [3] is the spare screw hole.
2. Remove the Cable Cover [1].
• 2 Claws [2]
[2]
[1]
[2]
3. Remove the PCB Holder [1].
• 1 Screw [2]
[1]
[2]
1x
4. Remove the Stapler Unit [1].
• 2 Connectors [2]
[2]
[1]
2x
Removing the Staple-free
Staple Unit
■ Preparation
1. Remove the machine from the host machine.
“Removing this Machine” on page 44
2. Remove the Rear Cover. “Removing the Rear Cover”
on page 51
■ Procedure
1. Remove the Connector [1] and the Cable [2].
[1]
[2]
1x
1x
4. Parts Replacement and Cleaning
60