Canon Inner Finisher-K1, Service Manual

Page: 81 / 114

Adjusting the Processing Tray Area
In the case adjusting the processing tray area, adjust the paper alignment at first, and adjust the staple position.
In the case adjusting the paper alignment, adjust skew and transport direction at first, and adjust front
‐
rear direction.
No Items Use case Refer to
1
Adjusting the
Paper Align-
ment
Adjusting Stacker Alignment
Position
When misalignment occurs in front/rear direction.
“Adjusting Stacker
Alignment Position ” on
page 73
2
Adjusting Center Alignment
Standard Position
• When the standard position for the center alignment
is misaligned.
• When misalignment occurs in front/rear direction.
“Adjusting Center Align-
ment Standard Posi-
tion ” on page 77
3
Right Angle Adjustment of
Alignment Plate • When remove or replace the alignment plate.
• When the paper alignment position is displaced.
“Right Angle Adjustment
of Alignment Plate ” on
page 71
4 Adjusting the Return Belt When misalignment occurs in feed direction.
“ Adjusting the Return
Belt Pressure” on page
80
5
Adjusting the
Staple Position
Adjusting the Staple Position
When the staple position in front/rear direction is dis-
placed in the front/rear 1-stapling mode or 2-stapling
mode.
“Adjusting the Staple
Position ” on page 81
6
Adjusting the Stapler Unit In-
stallation Position
• When the stapler unit is replaced.
• When the staple position in feed direction is dis-
placed in the front/rear 1-stapling mode or 2-sta-
pling mode.
“Adjusting the Stapler
Unit Installation Posi-
tion ” on page 82
7
Adjusting the Staple-Free
Binding Position When the staple-free binding position in the staple-free
binding mode.
“Adjusting the Staple-
Free Binding Position ”
on page 84
Adjusting the Paper Alignment
■ Adjusting Stacker Alignment Position
<Use case>
• When misalignment occurs in front/rear direction.
Feed Direction Feed Direction
<Procedure of adjustment>
NOTE:
After the setting value is changed, write the changed value in the service label.
5. Adjustment
75