Canon Inner Finisher-K1, Service Manual

Page: 72 / 114

Other Parts
Removing the Return Belt Unit
■ Preparation
1. Remove the machine from the host machine.
“Removing this Machine” on page 44
2. Remove the Front Cover Unit. “Removing the Front
Cover Unit” on page 51
3. Remove the Rear Cover. “Removing the Rear Cover”
on page 51
4. Remove the Delivery Tray. “Removing the Delivery
Tray” on page 51
5. Remove the Upper Feed Guide Unit. “Removing the
Upper Feed Guide Unit” on page 55
6. Remove the Stapler Unit. “Removing the Stapler
Unit” on page 60
■ Procedure
1. Remove the Upper Stay [1].
• 2 Screws [2]
[1]
[2]
2x
2. Remove the Center Return Belt Guide [1].
• 2 Bosses [2]
[1]
[2]
[2]
3. Rotate the machine [1] as shown below, and remove
the 2 Screws [2] of the Front/Rear Return Belt Guide.
[2]
[2]
[1]
2x
4. Return the machine to its original position.
5. Remove the Rear Return Belt Guide [1].
• 1 Boss [2]
4. Parts Replacement and Cleaning
66