Canon Inner Finisher-K1, Service Manual

Page: 59 / 114

2. When installing the Stack Tray, check that the 2
Claws [2] and 2 Hooks [3] of the Stack Tray [1] is
properly installed. If the installation fails, error;
E540-8001/8002 may occur at power ON.
[1]
[3]
[2]
[3]
[2]
[3]
[2]
Removing the Tray Guide
Cover
■ Preparation
1. Remove this machine from the host machine.
“Removing this Machine” on page 44
2. Remove the Front Cover Unit. “Removing the Front
Cover Unit” on page 51
3. Remove the Rear Cover. “Removing the Rear Cover”
on page 51
4. Remove the Delivery Tray. “Removing the Delivery
Tray” on page 51
5. Remove the Upper Feed Guide. “Removing the
Upper Feed Guide Unit” on page 55
■ Procedure
1. Remove the Upper Stay [1].
• 2 Screws [2]
[1]
[2]
2x
2. Move the Front Alignment Plate [1] and Rear
Alignment Plate [2] to the slit [3] of the Tray Guide
Cover.
[1]
[2]
[3] [3]
3. Release the latch [1] and move the Front/Rear Tray
Plate [2] to the bottom.
[1] [2] [2]
4. Remove the Tray Guide Cover [1].
• 2 Screws [2]
• 2 Claws [3]
4. Parts Replacement and Cleaning
53