Canon imageRUNNER C1325 Series, Service Manual

Page: 98 / 607

2
2
2-67
2-67
Technical Explanation > Image Formation System > Controls > Toner Supply Assembly
Technical Explanation > Image Formation System > Controls > Toner Supply Assembly
● Toner Level Detection
Detection
description
Prior delivery alarm Display Remaining Toner
error (*5)
Empty toner
The residual
quantity of the
toner
Default: xx %*
The value can be changed
in service mode. (*1)
Default: xx %*
The value can be changed
in service mode. (*2)
0%
Detection
timing
Prediction from the toner supply count (Judged from
the number of supplying toner to the Hopper Unit.)
When the output signal
from the ATR Sensor
does not fall below the
designated value even
after performing a toner
supply operation.
Detecting to
(location)
Developing Assembly supply count. *3 ATR Sensor
Message
(machine
operation)
None Please prepare a toner
container(Continuous
printing is enabled.)
Replace the toner
cartridge. (Host machine is
stopped.)
Alarm Code 10-0017 (Y)
10-0018 (M)
10-0019 (C)
10-0020 (Bk)
10-0001 (Bk) *4
10-0002 (C) *4
10-0003 (M) *4
10-0004 (Y) *4
None
*: The default differs depending on the country.
*1: (Lv.1) COPIER > OPTION > FNC-SW > T-DLV-CL/BK
*2: (Lv.2) COPIER > OPTION > DSPLY-SW > T-LW-LVL
Caution:
Toner-out message may be displayed before remaining toner error message is
displayed if the value of (Lv.2) COPIER>OPTION>DSPLY-SW>T-LW-LVL is lowered
than the initial value due to the margin of the developing supply count.
*3: The toner supply count shows the amount of toner supplied from the Toner Container to
the Developing Assembly.
*4: Alarms generated by UGW are not recorded in the alarm log of LUI.
*5: Whether or not to display the Remaining Toner Error Message can be set in COPIER >
OPTION > DSPLY-SW > TNR-WARN (Lv.1).
T-2-31
● Detection of the completion of toner replacement
Detection of the completion of replacement
Detection timing When a replacement of Toner Container is detected
Alarm Code 10-0100
Remarks The toner supply count is reset at the same time.
NOTE:
The Hopper Assembly of this machine is extremely small, so printing will not be possible
after detecting the absence of toner since there will be no toner in the Hopper Assembly.
Therefore, the 3-level display, which is available with, for example, imageRUNNER
ADVANCE C5051 series, is not available.
* Whether or not to display the Remaining Toner Error Message can be set in COPIER
> OPTION > DSPLY-SW > TNR-WARN (Lv.1).
Related error codes:
E025-0110 Bottle Motor (YM) lock detection error (Y)
E025-0210 Bottle Motor (YM) lock detection error (M)
E025-0310 Bottle Motor (CK) lock detection error (C)
E025-0410 Bottle Motor (CK) lock detection error (Bk)
E025-0168 No toner detection error (Y)
E025-0268 No toner detection error (M)
E025-0368 No toner detection error (C)
E025-0468 No toner detection error (Bk)
T-2-32