Canon imageRUNNER C1325 Series, Service Manual

Page: 523 / 607

8
8
8-84
8-84
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> BODY
PASCL-TY Set of paper type for auto gradation adj
Details Auto gradation adjustment is normally executed with the recommended
paper specified for each location. However, if you want to change the
paper type, use this setting to change the paper type.
Use case When executing the auto gradation adjustment using a paper other than
the recommended paper type
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Caution Do not change the setting in the normal operation.
Display/adj/set range 1 to 3
1: CS680 [Nippon Paper Industries] (Except for USA and EU.
Mainly for Japan)
2: Hammermill Laser Print [International Paper] (For USA)
3: Canon Office 80 [Mondi Business Paper] (For EU)
Default value JP:1, USA:2, EUR:3, AU:1, CN:1, KR:1, TW:1, ASIA:1
Related UI menu Adjustment/Maintenance> Auto Adjust Gradation> Full Adjust
T-8-36
■
FNC-SW
COPIER> OPTION> FNC-SW
INTROT-1 Set ATR ctrl patch density dtct interval
Details To set execution interval of patch density detection executed at ATR
control.
By changing the setting value, execution intervals at last rotation and at
paper interval are changed.
Decrease the value if E020 error occurs frequently. As the execution
frequency is increased, correction accuracy for density variation is
increased. Since patch density detection is linked with low duty toner
ejection, lowering of density can be prevented by increasing the
frequency.
When the value is increased, downtime can be reduced because of
decrease of execution frequency, but an image failure might occur.
Use case • When E020 error occurs frequently
• Upon user’s request (decrease downtime)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and press
Start key.
Display/adj/set range -1 to 3
-1: Every 30 sheets at last rotation, every 80 sheets at paper interval
0: Every 50 sheets at last rotation, every 100 sheets at paper interval
1: Every 100 sheets at last rotation, every 150 sheets at paper interval
2: Every 150 sheets at last rotation, every 200 sheets at paper interval
3: Every 200 sheets at last rotation, every 250 sheets at paper interval
Default value 0
INTROT-2 Set of auto adjustment execute interval
Details To set the paper interval to execute auto adjustment (D-max control,
D-half control).
As the value is incremented by 1, the paper interval is increased by 1
sheet.
If a new Drum Unit whose number of fed sheets is 1000 or less is
installed, the interval is 250 sheets at a maximum.
Use case When matching the use environment of the user.
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Caution Increasing the number of sheets (widening the interval) causes higher
frequency of image failure.
Display/adj/set range -20 to 2000
Default value 0