Canon imageRUNNER C1325 Series, Service Manual

Page: 425 / 607

7
7
7-54
7-54
Error•Jam•Alarm > Error Code > Error Code Details
Error•Jam•Alarm > Error Code > Error Code Details
Error
code Detail
Code
Item Description
E806 0401 Title Duplex Cooling Fan error
Description The Duplex Cooling Fan in the Right Cover rotated for more than the
specified period of time after the stop of drive.
Remedy [Related parts]
• Harnesses from the DC Controller PCB to the Duplex Cooling Fan
1. DC Controller PCB (UN04/J122) to Relay Connector (17P) (Unit of
replacement: 2ST TRANS. H.V. CONTACT ASS’Y)
2. Relay Connector (17P) to Relay Connector (3P) (Unit of
replacement: CABLE, DOOR, RIGHT)
3. Relay Connector (3P) to Relay Connector (3P) (Unit of
replacement: CABLE, DOOR FAN, RIGHT)
4. Relay Connector (3P) to Duplex Cooling Fan (FM04)
• Duplex Cooling Fan (FM04)
• DC Controller PCB (UN04) (Unit of replacement: DC CONTROLLER
PCB ASSEMBLY)
[Points to note at work] When checking the harness/cable or connector,
perform the following work.
1. Disconnect and then connect the connector to check that there is no
bent pin and cable disconnection.
2. Visually check that the harness is not caught or open circuit.
3. If there is any error, replace the corresponding harness/cable.
[Remedy] Check/replace the related parts.
E808 0001 Title Zero cross signal detection error
Description An electrical trouble caused by zero cross signal error.
Frequency between 43 Hz and 57 Hz could not be detected for 5000 msec
or longer.
Remedy [Related parts]
• Harness between the Low-voltage Power Supply PCB (UN01/J322)
and the DC Controller PCB (UN04/J22) (Unit of replacement: CABLE,
POWER SUPPLY)
• Low-voltage Power Supply PCB (UN01) (Unit of replacement: POWER
SUPPLY ASSEMBLY)
• DC Controller PCB (UN04) (Unit of replacement: DC CONTROLLER
PCB ASSEMBLY)
[Points to note at work] When checking the harness/cable or connector,
perform the following work.
1. Disconnect and then connect the connector to check that there is no
bent pin and cable disconnection.
2. Visually check that the harness is not caught or open circuit.
3. If there is any error, replace the corresponding harness/cable.
[Remedy] Check/replace the related parts.
E996 0071 Title Error for collecting sequence jam log (ADF)
Description Error for collecting sequence jam log (ADF)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-R” to “0”
(default), it is handled as a jam, instead of an error.
Error
code Detail
Code
Item Description
E996 0CA0 Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CA1 Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CA2 Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CA3 Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CA4 Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CA9 Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CAB Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CAD Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.
E996 0CAE Title Error for collecting sequence jam log (Printer)
Description Error for collecting jam log (Printer)
Remedy
[Remedy] Collect debug log and contact to the sales company.
[Reference] By setting “COPIER > OPTION> FNC-SW> JM-ERR-D” to “0”
(default), it is handled as a jam, instead of an error.