Canon imageRUNNER C1325 Series, Service Manual

Page: 273 / 607

4
4
4-123
4-123
Disassembly/Assembly > Image Formation System > Removing the Registration Drive Unit > Procedure
Disassembly/Assembly > Image Formation System > Removing the Registration Drive Unit > Procedure
NOTE: How to assemble the Secondary Transfer Outer Roller Guid Unit
When assembling, insert the protrusion [A] of the Secondary Transfer Outer Roller Guid
Unit into the groove [B] of the Right Cover Unit, and insert the protrusion [C] between
the groove [D] of the Lock Guide and the spring [1] to install the unit.
Align the groove [E] of the Lock Guide with the protrusion [F] of the Right Cover Unit to
lock the claw [2].
1x
[2]
[F]
[E]
[C]
[A]
[1]
[D]
[B]
F-4-311
Removing the Registration Drive Unit
■
Preparation
1) Remove the Front Cover(Refer to page 4-33).
2) Remove the Right Front Cover(Refer to page 4-37).
3) Remove the Waste Toner Container(Refer to page 4-108).
■ Procedure
1) Remove the Front Inner Lower Cover [1].
• 2 Screws [2]
• 4 Claws [3]
• 2 Bosses [4]
• 1 Hook [5]
2x
4x
[1]
[2]
[4]
[4]
[5]
[2]
[3]
F-4-312
F-4-313