Canon imageRUNNER C1325 Series, Service Manual, Page: 307 / 607

4
4
4-157
4-157
Disassembly/Assembly > Pickup/Feed System > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detached > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detached and dropped inside the host machine
Disassembly/Assembly > Pickup/Feed System > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detached > Reassembling when the Multi-purpose Tray Separation Roller Shaft is detached and dropped inside the host machine
6) Assemble the Torque Limiter [2] on the Multi-purpose Tray Separation Roller Shaft [1].
CAUTION:
Be sure to align the groove [A] of the Torque Limiter [2] with the protrusion [B] of the
Multi-purpose Tray Separation Roller Shaft [1] to assemble.
[1]
[2]
[A]
[B]
F-4-410
[1]
[2]
F-4-411
7) Assemble the Separation Roller [2] on the Multi-purpose Tray Separation Roller Shaft [1].
• 1 Claw [3]
CAUTION:
Be sure to align the groove [A] of the Separation Roller [2] with the protrusion [B] of the
Torque Limiter [4] to assemble.
[2] [4]
[A] [B]
F-4-412
1x
[1]
[2]
[3]
Be sure to reassemble according to steps 7 to 1 by referring to the Assembly Procedure.
F-4-413