Canon imageRUNNER C1325 Series, Service Manual

Page: 470 / 607

8
8
8-31
8-31
Service Mode > COPIER > ADJUST > CCD
Service Mode > COPIER > ADJUST > CCD
COPIER> ADJUST> CCD
MTF-M4 MTF value 4 setting: horz scan [DADF]
Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case • When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the service
label.
Display/adj/set range 0 to 100
Unit 1 %
Default value 100
MTF-M5 MTF value 5 setting: horz scan [DADF]
Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case • When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the service
label.
Display/adj/set range 0 to 100
Unit 1 %
Default value 100
MTF-M6 MTF value 6 setting: horz scan [DADF]
Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case • When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the service
label.
Display/adj/set range 0 to 100
Unit 1 %
Default value 100
COPIER> ADJUST> CCD
MTF-M7 MTF value 7 setting: horz scan [DADF]
Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case • When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the service
label.
Display/adj/set range 0 to 100
Unit 1 %
Default value 100
MTF-M8 MTF value 8 setting: horz scan [DADF]
Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case • When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the service
label.
Display/adj/set range 0 to 100
Unit 1 %
Default value 100
MTF-M9 MTF value 9 setting: horz scan [DADF]
Details Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case • When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the service
label.
Display/adj/set range 0 to 100
Unit 1 %
Default value 100