Canon imagerunner advance 8205 Operation Manual Download Page 99

Page: 99 / 264

Routine Maint

enanc

Gently push the saddle stitcher unit (F-C4) back into the machine, and close the
front cover.

1. Gently push the saddle

stitcher unit (F-C4) back into
the machine.
Always make sure to push
the saddle stitcher unit in as
far as it can go.

2. Close the front cover of the

fi nisher.

• When pushing the saddle stitcher unit back into its original position, be careful not to get your

fi ngers caught, as this may result in personal injury.

• When closing the front cover of the fi nisher, be careful not to get your fi ngers caught, as this

may result in personal injury.

Summary of Contents for imagerunner advance 8205









































































































































































































































































Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands

Canon imagerunner advance 8205, Operation Manual

Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands