Canon imagerunner advance 8205 Operation Manual Download Page 244

Page: 244 / 264

244

Q&A

How do I forward received data to

the Advanced Box?

Specify an Advanced Box

destination registered in the

Address Book as the forwarding

destination.

■

Registering an Advanced Box
Destination in the Advanced
Box:

1. Press

(Settings/Registration).

2. Press [Set Destination]



[Register

Destinations]



[Register New Dest.].

3. Press [File]



register the Advanced Box

destination.

■

Registering an Advanced Box
Destination as a Forwarding
Destination:

1. Press

(Settings/Registration).

2. Press [Function Settings]



[Receive/

Forward]



[Common Settings].

3. Press [Forwarding Settings]



[Register]



specify the forwarding conditions.

4. Press [Forwarding Destination]



[Address Book]



specify the Advanced

Box destination.

Additional Information

• For information on registering an

Advanced Box destination in the Address
Book, see e-Manual > Scan and Send.

• For more information on forwarding

settings, see e-Manual > Settings/
Registration.

How do I set to create a booklet

with a file in a mail box?

You can create a booklet using

the Booklet mode. Specify the

following settings.

■

Setting procedure:

1. Press [Access Stored Files]



[Mail Box]



select a stored document.

2. Press [Print]



[Change Print Settings]



[Options].

3. Press [Booklet]



[Booklet Scan]



[Fold

+ Saddle Stitch].

4. Specify the cover settings, orientation,

and detailed settings



press [OK].

Summary of Contents for imagerunner advance 8205









































































































































































































































































Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands

Canon imagerunner advance 8205, Operation Manual

Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands