manualshive.com logo in svg

Canon imagerunner advance 8205, Operation Manual

Share
Download
Canon imagerunner advance 8205 Operation Manual Download Page 89

89

Routine Maint

enanc

e

4

Select the desired paper size 

 press [Next].

Select the same paper size that is loaded in the Document Insertion Unit-K1.

To select an A or B series paper size, press [Inch Size].

5

Select the desired paper type 

 press [OK].

Make sure that the height of the paper stack does not exceed the loading limit mark ( 

 ).

•  You cannot make copies or prints on paper that is loaded in the Document Insertion Unit-K1.
•  You can load the coated paper (29 lb bond to 140 lb index (106 to 256 g/m

2

)) into the Document Insertion 

Unit-K1. You cannot load the coated paper into the Paper Drawer (Right/Left), Paper Drawer 3 and 4, multi-
purpose tray, Paper Deck Unit-C1, or POD Deck Lite-A1.

•  A maximum of 200 sheets of paper (20 lb bond (80 g/m

2

)) can be loaded in the tray of Document Insertion 

Unit-K1.

•  For instructions on loading tab paper into the Document Insertion Unit-K1, see “Loading Tab Paper Using 

the Tab Feeding Attachment Kit-B1 (Optional),” on p. 71.

•  Rewrap any remaining paper in its original package, and store it in a dry place, away from direct sunlight.

    

  

Summary of Contents for imagerunner advance 8205









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands