manualshive.com logo in svg

Canon imagerunner advance 8205, Operation Manual

Share
Download
Canon imagerunner advance 8205 Operation Manual Download Page 94

94

2

Pull out the staple case from the stapler unit, holding it by its green tab.

When the stapler unit is at the back and it is diffi

  cult to pull out the staple case, turn the dial on the bottom 

left hand side to the left to move the stapler unit.

3

Pull out the staple cartridge.

1.  Pull out the staple cartridge.
2.  Insert the new staple 

cartridge.

•  Remove the seal that holds the staples together after you place the staple cartridge into the staple case.
•  Only one staple cartridge can be inserted at a time.

4

Gently push the staple case into the stapler unit, until it is securely in place.

Always make sure to insert the staple case as far as it can go.

Summary of Contents for imagerunner advance 8205









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands