manualshive.com logo in svg

Canon imagerunner advance 8205, Operation Manual

Share
Download
Canon imagerunner advance 8205 Operation Manual Download Page 156

156

   Procedure to Remove the Jammed Paper Eff ectively from the Paper Drawers 

 If a paper jam occurs in the paper drawers and you do not perform correct operations, paper jam may occur continuously. This 
section explains how to clear the paper jam eff ectively in the paper drawers. 
  

: Do not apply (OK)

: Apply (No Good (NG))

  

A paper jam occurs.

1. 

Check that there is a problem with paper.

 

●

Paper is loaded diagonally.

 

●

Paper appears dirty and has tears.

 

●

Several sheets of paper are attached.

 

●

Paper is already curled.

Step 3

2.  

●

Align the edges of paper and reload it.

 

●

Remove the paper with a problem.

 Check that the machine operates normally.

Finish

3. 

Fan all four borders of paper well.



Check that the machine operates normally.

Finish

4. 

Check that the paper stack is not curled.
Turn the paper stack over and check that the paper stack is not curled 
to the opposite direction.

Step 7

5. 

Turn the paper stack over and reload it.

 Check that the machine operates normally.

Finish

6. 

Gently bend the paper in the direction opposite to the curl.
Reload the paper with less than ±1/5” (5 mm) curls.

 Check that the machine operates normally.

Finish

7. 

Use a new paper stack or change the paper type.

  

Summary of Contents for imagerunner advance 8205









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands