manualshive.com logo in svg

Canon imagerunner advance 8205, Operation Manual

Share
Download
Canon imagerunner advance 8205 Operation Manual Download Page 75

75

Routine Maint

enanc

e

1

Open the paper deck unit.

1.  Press the open button.
2.  Open the paper deck unit.

The inside lifter automatically 
descends to the paper loading 
position.

2

Prepare the paper to load.

Open the packaging for the 
paper, and remove the paper 
stack.

•  For high-quality printouts, use paper recommended by Canon.
•  Before loading paper, always fan the sheets several times, and align the edges to facilitate feeding

.

3

Lift the feeding support roller.

If the Paper Deck Unit-C1 is attached, proceed to step 4.

•  When loading paper, be sure to fi rst lift the feeding support roller. If you load paper without raising the 

feeding support roller, it may become detached, and paper may not be fed properly.

•  Use of the paper deck with the feeding support roller detached, may cause paper jams.

Summary of Contents for imagerunner advance 8205









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands