manualshive.com logo in svg

Canon imagerunner advance 8205, Operation Manual

Share
Download
Canon imagerunner advance 8205 Operation Manual Download Page 128

128

  

   Manual  Feeder  Cleaning 

 If originals that have been fed through the feeder have streaks or appear dirty, clean the feeder’s scanning area and the rollers. 
 Clean the rollers of the feeder with a cloth which is wrung after being dampened in water, and then wipe them clean with a 
soft, dry cloth. 

  

 

 

•   Spin the rollers while cleaning them. 
•   If the document feed scanning area is dirty, documents may not be scanned clearly, and the size of the document may not be 

detected correctly. 

  

 

 

 This procedure is necessary only if the Duplex Color Image Reader Unit-G1 is attached. 

  

 Cleaning the Original Scanning Area of the Feeder 

1

Clean the original Scanning area (thin glass strip).

1  Open the feeder.
2  Clean the original scanning 

area (thin glass strip) with 
a cloth dampened in water, 
and then wipe the area with 
a soft dry cloth.

2

Open the covers.

1  Pull the lever above the 

feeder, and open the 
document scan cover.

2  Hold the blue tab above the 

inside cover, and open the 
inside cover in the direction 
of the arrow.

Open the document scan cover carefully, as not to scratch the platen glass.

  

Summary of Contents for imagerunner advance 8205









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands