Canon imagerunner advance 8205 Operation Manual Download Page 168

Page: 168 / 264

168

Open the front cover of the Professional Puncher Integration Unit-B1.

Remove any jammed paper from the guide (R-A).

1. Lift up the guide (R-A) until

it clicks into place.

2. Remove any jammed paper.
3. Close the guide (R-A) until

it clicks into place.

When closing the guide, be careful not to get your fi ngers caught, as this may result in personal
injury.

Turn the lever of the guide (R-B1), and open the guide (R-B1).

1. Turn the lever of the guide

(R-B1) to the right.

2. Open the guide (R-B1) until

it clicks into place.

Summary of Contents for imagerunner advance 8205









































































































































































































































































Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands

Canon imagerunner advance 8205, Operation Manual

Search results

Summary of Contents for imagerunner advance 8205

Reviews:

Brands by name

Popular brands