manualshive.com logo in svg

Canon imagerunner advance 8205, Operation Manual

Share
Download
Canon imagerunner advance 8205 Operation Manual Download Page 188

188

13

Close the delivery guide (F-C8).

When closing the guide, be careful not to get your fi ngers caught, as this may result in personal 
injury.

14

Push the saddle stitcher unit (F-C4), and close the front cover of the fi nisher.

1.  Gently push the saddle stitcher 

unit (F-C4) back into the machine.

Always make sure to push the saddle 
stitcher unit in as far as it can go.

2.  Close the front cover of the 

fi nisher.

When returning the saddle stitcher unit to its original position or closing the cover, be careful not 
to get your fi ngers caught, as this may result in personal injury.

15

Follow the instructions on the touch panel display.

The screen indicating the directions on how to clear the paper jam is displayed repeatedly until the paper 
jam is cleared.

Summary of Contents for imagerunner advance 8205









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands